This patented technology is available for use only under license agreement.
Cosmichrome tolerates high temperatures.
350ºF is now the upper temperature limit. You can now bake the topcoat at high temperatures. There is no longer the 100ºF/40ºC top coat baking limit. Cosmichrome will not get foggy if over heated about 100ºF when the topcoat is wet. The maximum temperature is 300ºF. Flash off the topcoat for 20 minutes and then bake at higher temperatures for faster and more durable curing. Be careful your part does not melt. Parts that won’t tolerate high heat themselves will still melt.
Improved base coat filling, hiding and leveling.
As easy as our base coat has been to apply, it is even easier now. It hides substrate defects better. Less sanding and prep work is needed. Also it is even more reflective than before. S
Worry free 100% Reliable and Permanent Silver Adhesion to Base Coat.
As many of you already know, Cosmichrome has always had the best silver adhesion in the industry despite some of our competitors’ claims. With this new technology you will achieve perfect silver adhesion every time regardless of how long you dry the base coat. In fact, the only danger is under drying. The silver will adhere to the base coat even if the base coat has cross-linked and hardened. Let it dry a day, a week or even a month. It does not matter. Adhesion is perfect and permanent. Double activation uses our same A22 activator. No need to heat the Activator water unless it is cold.. Mix at room temp and it is ready in only 10 minutes. If the water is cold let it warm up to room temperature for an hour.
100% Reliably and Permanent Topcoat Adhesion to Silver.
Using an adhesion promoting clear coat, the topcoat adhesion is reliable under nearly any humidity conditions in the paint booth. As soon as all the water is blown off the part it is immediately coated with the adhesion promoter. The adhesion promoter is single component and does not contain isocyanates. No mixing. This coating takes about one hour to force dry with moving air. Heat is not necessary but can be used. It is then coated with the normal VU-13.
Excellent Thermal Shock.
Cosmichrome holds together during extreme and rapid temperature changes on substrates that have high coefficients of expansion such as urethane plastics. Go from the car wash to sub freezing temperatures with no problems.
Fast drying topcoat.
Does not turn yellow over time! All competing spray chrome are plagued with yellowing. Cosmichrome patented technology has eliminated this issue.
What this all means is that you will be able to produce a more durable finish that is much less sensitive to variations in the application. You will also be able to coat parts that are exposed to much higher temperatures than with competing products..
You will no longer have to worry about how long you baked the base coat and at what temperature. The dryer the better.
The base resistant to runs.
Meets or exceeds many if not most OEM paint standards.
Similar process to what we developed for LG’s production line but even more durable.
Reduces or eliminates many top coat reactions to contaminants.
Less sensitive to moisture and humidity during application and in the environment.
Weather and humidity will cause fewer problems during the application.
Own a competitor’s system?
We’ll help you face the world again!
Have you purchased a competing Spray On Chrome System?
Basecoat won’t lay out?
Poor success rate.?
1 in 10 parts come out okay?
Neglected to check for satisfied references?
Didn’t get samples or got pieces of tiles as samples?
Don’t Blame Yourself.
Dozens of companies have switched from competing spray chrome products to Cosmichrome™.
Are you tired of orange peel in your base coat?
Tired of burn marks around holes?
Tired of parts turning yellow in several months?
Silver fading away in a few months?
If you are disappointed with the results and durability of your competing system,
don’t be embarrassed. Call or email us for Help and references.